Oven repair · Saanich, BC

Oven Repair Saanich

Won't heat, burns the bottom, never reaches temperature or won't unlock.

We handle oven repair in homes across Saanich, on wall ovens and the ovens in freestanding ranges, electric and gas. Whether it stays cold, the broiler has quit, baking comes out uneven, preheating takes forever or the door stays locked after self-clean, a technician comes to your kitchen, finds the fault and works on it there.

Symptoms

What is your oven doing?

The oven problems we see most in Saanich kitchens, with the parts that usually cause them. The technician confirms the actual fault on site before any repair.

Sparks from an element, or a gas smell? Turn the oven off, and for gas, leave the house and call your gas utility or 911 from outside.

01The oven won't heat at all

The display works and the fan may run, but the oven stays cold. On electric models the bake element is the usual suspect; on gas models, the igniter.

  • Often
  • Bake element
  • Gas igniter
  • Thermal fuse
  • Control board
02Bake works, but the broiler doesn't

When only the top heat is missing, the problem is almost always limited to the broil side of the oven.

  • Often
  • Broil element
  • Broil igniter
  • Wiring
03Temperature is off, or baking is uneven

Burnt bottoms, raw centres or recipes that no longer work usually mean the oven isn't reading or holding its temperature correctly.

  • Often
  • Temperature sensor
  • Calibration
  • Door gasket
  • Convection fan
04Preheating takes far too long

If it used to preheat quickly and now takes ages, one heat source may have failed, or a gas igniter may be too weak to open the valve properly.

  • Often
  • Weak gas igniter
  • Bake or broil element
  • Sensor
05The door won't close, or stays locked

A door that sags lets heat escape. One that stays locked after self-clean, even once cool, usually has a lock motor or switch problem.

  • Often
  • Door hinges
  • Door gasket
  • Door lock motor
  • Lock switch
06The convection fan is noisy or not spinning

Grinding or rattling from the back wall, or convection cooking that's no faster than regular bake, points to the fan assembly.

  • Often
  • Convection fan motor
  • Fan blade
  • Convection element
07Error code, or the display is blank

An error code is the oven telling us where to look. Write it down before you call. A dead display with power to the house points to the controls.

  • Often
  • Control board
  • Touchpad
  • Sensor fault

Before you call, four quick checks

With the oven off and cool.

  1. 01

    Breaker

    Electric ovens use a double breaker. If half has tripped, the display may work while the oven won't heat.

  2. 02

    Clock and lock

    After a power outage some ovens won't start until the clock is set. Also check the control lock is off.

  3. 03

    After self-clean

    The door stays locked until the oven cools down. Give it an hour or two before assuming it's stuck.

  4. 04

    Oven thermometer

    If baking seems off, an inexpensive oven thermometer shows whether the temperature really is wrong.

Still cold, still off, or still locked? Book an oven repair and we'll take it from there.

Oven brands we repair

Don't see yours? (250) 999-3866

01Samsung
02LG
03Whirlpool
04GE
05Frigidaire
06KitchenAid
07Bosch
08Maytag
09Electrolux
10Miele
11Kenmore
12Amana

Book a repair

Book your oven repair in Saanich

Send your details and we'll call back to go over the oven and set up a visit. Or call (250) 999-3866.

Service requestOven · Saanich, BC