Dishwasher repair · Saanich, BC

Dishwasher Repair Saanich

Dirty dishes, standing water, leaks or a dishwasher that won't start.

We handle dishwasher repair in homes across Saanich. If it leaves food on the plates, keeps water in the bottom, leaks under the door, won't fill or dry, or just blinks and does nothing, a technician comes to your kitchen, finds the fault and works on it right there.

Symptoms

What is your dishwasher doing?

The dishwasher problems we see most in Saanich kitchens, with the parts that usually cause them. The technician confirms the actual fault on site before any repair.

01Dishes come out dirty or gritty

If food is left on plates or there's a sandy film on glasses, water isn't reaching the dishes with enough force, or it's being recirculated dirty.

OftenClogged spray arms · Blocked filter · Wash pump · Low water fill

02Water sits in the bottom after a cycle

A little moisture is normal. A pool of dirty water means the dishwasher can't push water out to the sink drain.

OftenClogged filter · Drain pump · Kinked drain hose · Garbage disposal connection

03Water leaking onto the floor

Leaks at the front usually come from the door, while water underneath points to hoses, the pump or the tub itself. Soaked cabinets are worth catching early.

OftenDoor gasket · Door hinge · Inlet or drain hose · Pump seal

04It won't fill, or beeps about no water

You hear it start, but no water comes in. The valve that lets water in, or the switch that measures the level, has usually stopped doing its job.

OftenWater inlet valve · Float switch · Supply line · Control board

05Dishes stay wet at the end

Some plastics always come out damp. When everything is wet, the drying system or the rinse aid supply is usually the issue.

OftenHeating element · Vent or fan · Rinse aid dispenser · Thermostat

06It won't start, or the lights just blink

If the door is closed and nothing happens, the dishwasher may not be sensing a latched door, or the controls have stopped responding. Note any error code.

OftenDoor latch · Door switch · Touchpad · Control board

07Grinding, humming or loud noises

A new grinding sound often means something hard, like glass or a bone, has reached the pump. A steady hum with no water moving usually means a motor is stuck.

OftenDebris in the pump · Wash motor · Drain pump · Chopper assembly

Before you call, four quick checks

Simple things that fix more dishwashers than you'd expect.

  1. Check 1

    Filter

    Most dishwashers have a filter under the bottom rack that twists out. Rinse it under the tap.

  2. Check 2

    Sink and disposal

    The dishwasher often drains through the garbage disposal. Run the disposal briefly and check the sink drains well.

  3. Check 3

    Hot water

    Run the kitchen tap until it's hot before starting a cycle, so the dishwasher begins with warm water.

  4. Check 4

    Spray arms

    Spin them by hand. Tall pans or utensils hanging through the rack can stop them from turning.

Still not working, or water on the floor? Turn off the dishwasher, wipe up the water, and book a dishwasher repair.

Dishwasher brands we repair

Don't see yours? (250) 999-3866

01Bosch
02Samsung
03LG
04Whirlpool
05KitchenAid
06Maytag
07GE
08Frigidaire
09Electrolux
10Miele
11Kenmore
12Amana

Book a repair

Book your dishwasher repair in Saanich

Send your details and we'll call back to go over the dishwasher and set up a visit. Or call (250) 999-3866.

Service requestDishwasher · Saanich, BC